1-61
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter1 Preparing for Installation
RSP and RP Port Connection Guidelines
When lit, these LEDs indicate for UTI:
•Green (NORMAL)—UTI is operating in normal mode.
•Amber (FAST)—UTI is operating in fast mode.
Figure1-66 SYNC Port Connector
SFP/SFP+ Port
The RSP-440 and RSP-440 Lite support two 10-GE Small Form-Factor Pluggable Plus (SFP+)
virtualization cluster ports. The RSP-880 supports four 10-GE SFP+ ports that are used for external
server connectivity capability.
GPS Interface
The RSP-440, RSP-440 Lite, and RSP-880 have a Time of Day (ToD) port, 10-MHz connector, and
1-PPS connector that allow you to configure input or output clocking with a GPS device.
Inter Chassis Synchronization Port
The nV Sync 0 and nV Sync 1 ports on the RSP-440, RSP-440 Lite, and RSP-880 are the RJ-45
inter-chassis synchronization clock interfaces for synchronizing frequency and time.
Table1-9 BITS/J.211 Connector Pinout
Pin Signal Note
1 DTI_P/BITS_RX_P Bi-direction for DTI, T1/E1/64K Input
2 DTI_P/BITS_RX_N B i-direction for DTI, T1/E1/64K Input
3— —
4 BITS_TX_P* T1/E1/6.321M Output
5 BITS_TX_N* T1/E1/6.321M Output
6— —
7— —
8 — —
243166
12345678