CHAPT ER
1-1
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
1
Preparing for Installation
This chapter provides preinstallation information, such as recommendations and requirements you should be
perform before installing your Cisco ASR 9000 Series Router.
The shipping package for the router is engineered to reduce the chances of product damage associated
with routine material handling experienced during shipment:
•Always transport or store the router in its shipping package in the upright position.
•Keep the router in the shipping container until you have determined the installation site.
Inspect all items for shipping damage. If an item appears damaged, contact a Cisco customer service
representative immediately.
•Safety Guidelines, page1-1
•Site Requirement Guidelines, page1-8
•RSP and RP Port Connection Guidelines, page1-55

Safety Guidelines

Before you perform any procedure in this guide, you must review the safety guidelines in this section to
avoid injuring yourself or damaging the equipment.
Note that this section contains guidelines and do not include every potentially hazardous situation. When
you install a router, always use common sense and caution.

General Safety Guidelines

•Never attempt to lift an object that might be too heavy for you to lift by yourself.
•Always disconnect the power source and unplug all power cables before lifting, moving, or working
on the router.
•Keep the work area clear and dust free during and after the installation.
•Keep tools and router components away from walkways and equipment rack aisles.
•Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught
in the router.
•Fasten your tie or scarf and sleeves.