5-2
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter5 Replacing Cisco ASR 9000 Series Router Components
Prerequisites and Preparation
Field Replaceable Units
In the Cisco ASR 9010 Router, Cisco ASR 9006Router, and Cisco ASR 9904 Router the following
components are field replaceable units (FRU):
•All line cards
•RSP cards
•Power modules
•Fan trays
•Air filters
•Line card and RSP blank fillers
•Compact flash disk
•Gigabit Ethernet small form-factor pluggable (SFP) transceiver modules
•10-Gigabit Ethernet small form-factor pluggable (SFP+) transceiver modules
•10-Gigabit Ethernet small form-factor pluggable (XFP) transceiver modules
•Optional card cage doors (Cisco ASR 9010 Router only)
Note The backplane is not field-replaceable.
In the Cisco ASR 9922 Router and CiscoASR 9912 Router, the following components are FRUs:
•All line cards
•RP cards
•Fabric cards
•Power modules
•Fan trays and covers
•Air filters and foam media
•Blank line card fillers
•Gigabit Ethernet small form-factor pluggable (SFP) transceiver modules
•10-Gigabit Ethernet small form-factor pluggable (SFP+) transceiver modules
•100-Gigabit Ethernet small form-factor pluggable (CFP) transceiver modules
•Optional card cage doors
Note The backplane and BPID cards are not FRUs but are field serviceable.
Online Insertion and Removal
Most Cisco ASR 9000 Series Routers FRUs can be removed and replaced with the power on and the
system operating. This is known as online insertion and removal (OIR). Power modules, fan trays, Route
Switch Processor (RSP) cards, Route Processor (RP) cards, Fabric Controller (FC) cards, Line Cards