4-26
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter4 Troubleshooting the Installation
Troubleshooting the Route Processor Subsystem
External Compact
Flash (CF)
[RSP only]
Green Compact Flash is busy/active.
Off
(Default after reset)
Compact Flash is not busy/active.
Internal Solid State
Hard Disk Drive (SSD)
RSP-440/RSP-440 Lite
RSP-880
Green Internal Solid State Hard Disk Drive (SSD0) is busy/active. The LED is
driven by the SSD/SAS controller.
Off
(Default after reset)
Internal Solid State Hard Disk Drive is not busy/active.
GPS
RSP-440/RSP-440 Lite
RSP-880
Green GPS interface provisioned and ports are turned on. ToD, 1 PPS, 10 Mhz are
all valid.
Off
(Default after reset)
Either the interface is not provisioned, or the ports are not turned on. ToD, 1
PPS, 10 Mhz are not valid.
External USB 2.0
RSP-440/RSP-440 Lite
RSP-880
Green External USB is busy/active.
Off
(Default after reset)
External USB is not busy/active.
Internal USB 2.0 A
RSP-440/RSP-440 Lite
RSP-880
Green Internal USB is busy/active.
Off
(Default after reset)
Internal USB is not busy/active.
Internal USB 2.0 B
RSP-440/RSP-440 Lite
RSP-880
Green Internal USB is busy/active.
Off
(Default after reset)
Internal USB is not busy/active.
Table4-4 RP and RP2 Discrete LED Display Definitions
Indicator (Label) Color Description
Power Fail
(FAIL)
Red
(Default after power on)
Standby Power Fail LED. The LED is turned off by the CAN bus controller
after it is up and running.
Off Standby power is normal.
Critical Alarm
(CRIT)
Red Critical Alarm LED. A critical alarm has occurred.
Off
(Default after reset)
No critical alarm has occurred.
Major Alarm
(MAJ)
Red Major alarm LED. A major alarm has occurred.
Off
(Default after reset)
No major alarm has occurred.
Minor Alarm
(MIN)
Amber Minor alarm LED. A minor alarm has occurred.
Off
(Default after reset)
No minor alarm has occurred.
Alarm Cutoff
(ACO)
Amber Alarm Cutoff has been enabled. The ACO push button was pressed after at
least one alarm has occurred.
Off
(Default after reset)
Alarm Cutoff is not enabled.
Table4-3 RSP, RSP-440, RSP-440 Lite, RSP-880 Discrete LED Display Definitions (continued)
Indicator (Label) Color Description