2-24
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Removing Components Before Installing the Chassis
Table2-1 Router Components and Slot Numbering for the CiscoASR 9010Router, Cisco ASR 9006 Router, and
CiscoASR 9904 Router
Router Model Number Router Components and Slot Numbering
Cisco ASR 9010 Router •10 slots.
•Version 1 power system (Figure2-19), Version 2 power system (Figure2-20), or Version
3 power system (Figure2-19 for AC and Figure 2-20 for DC).
•Two RSP cards installed in the two center slots (labeled RSP0 and RSP1).
•Four line cards installed in slots 0 through 3 to the left of the RSP card slots.
•Four line cards installed in slots 4 though 7 to the right of the RSP card slots.
Cisco ASR 9006 Router •6 slots.
•Version 1 power system (Figure2-21) or Version 2 power system (Figure2-22).
•Two RSP cards installed in the two lowest slots (labeled RSP0 and RSP1) located above
the power modules.
•Four line cards installed in slots 2 through 5 above the RSP card slots.
Cisco ASR 9904 Router •4 slots.
•Version 2 power system (Figure2-21).
•One line card installed in the top slot (labeled LC1). Two RSP cards installed in the
middle two slots (labeled RSP1 and RSP0) located between the line cards (LC0 and
LC1).
•One line card installed in the lowest slot (LC0) located above the power modules.