3-8
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter3 Installing Cards and Modules in the Chassis
Installing Cards in the Chassis
Figure3-4 RSP Card Ejector Lever Positions During Installation
Note: Vertical red lines in Figure3-4 indicate a line fully parallel to the RSP card front panel.
1Slightly loose position of
ejector levers when the RSP
card is fully seated in the
backplane, but the captive
installation screws are not
fully tightened
2Fully parallel position of
ejector levers when the RSP
card is fully seated in the
backplane and captive
installation screws are fully
tightened
3Slight gap that may be
present when the RSP card is
fully seated in the backplane
and captive installation
screws are fully tightened
243400
1 2
1 2
3