2-61
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Installing Chassis Accessories
The Cisco ASR 9000 Series Routers ship with a base set of chassis accessories. To install the base
accessories and optional accessories, see the appropriate installation procedure below for your router:

Base Accessories

•Installing Base Chassis Accessories on the Cisco ASR 9010 Router, page2-61.
•Installing Base Chassis Accessories on the Cisco ASR 9006 Router, page2-69
•Installing Base Chassis Accessories on the Cisco ASR 9912 Router, page2-93.
Note The Cisco ASR 9904 Router does not include base chassis accessories.

Optional Accessories

•Installing Optional Chassis Accessories on the Cisco ASR 9010 Router, page 2-64.
•Installing Optional Chassis Accessories on the Cisco ASR 9006 Router, page 2-72
•Installing Optional Air Baffles on the CiscoASR 9006 Router, page 2-75
•Installing Optional Air Baffles on the CiscoASR 9904 Router, page 2-82.
•Installing Optional Chassis Accessories on the Cisco ASR 9922 Router, page 2-91.
•Installing Optional Chassis Accessories on the Cisco ASR 9912 Router, page 2-95

Installing Base Chassis Accessories on the Cisco ASR 9010 Router

The base chassis accessories for the Cisco ASR 9010 Router include:
•Two ball studs
•Two plastic side strips
•One accessory front grill
Note If you ordered the optional accessories set, see Installing Optional Chassis Accessories on the
Cisco ASR 9010 Router, page2-64 to install both the base and optional accessories.
If you did not order the optional accessory set, follow these steps to install the supplied base chassis
accessories on the Cisco ASR 9010 Router:
Step1 Install two ball studs (one per side) into the chassis front edge (Figure2-55) near the top of the chassis
grill. Tighten the ball studs to a torque of 8in-lb (0.90 N-m).