2-44
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Rack-Mounting the Router Chassis
Note To install the CiscoASR 9010 Router chassis in a Seismic 2-post rack for optional earthquake
protection, two side brackets must be mounted to the chassis for attachment to the posts
(5” channel width) of the GR-63 Zone 4 Seismic 2-post rack.
Figure 2-39 shows the orientation of the CiscoASR 9010 Router chassis to the Seismic 2-post rack and
components used in the installation.
Figure2-39 Installing the CiscoASR 9010 Router Chassis in a Seismic 2-Post Rack
1Five screws per
side (minimum) to
attach the router
chassis to the rack
2Four screws
(minimum) to attach
the rear mounting
bracket to the rack
3Rear mounting
bracket
4Five screws to
attach the rear
mounting bracket to
the router chassis
243187
1
2 3
4