3-27
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter3 Installing Cards and Modules in the Chassis
Connecting Power to the Router
Caution To ensure that power remains off while you are performing this procedure, lock-out/tag-out the circuit
breaker switch in the off (0) position until you are ready to turn it on.
Step4 Plug the AC power cord into the receptacle at the rear of the AC power tray (see Figure3-19 for the
version 1 power tray and Figure3-20 for the version 2 and version 3 power tray).
Step5 Close the retainer bracket to secure the AC power cord plug to the version 1 power tray receptacle. For
the version 2 and version 3 power tray, tighten the screw that clamps the AC power cord plug in place.
Figure3-19 Typical AC Power Connections to an AC Power Tray—Version 1 Power System
Figure3-20 Typical AC Power Connections to an AC Power Tray—Version 2 and Version 3 Power System
Step6 Plug the other end of the AC power cord into the AC source receptacle.
243302
284278