2-69
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Installing Base Chassis Accessories on the Cisco ASR 9006 Router
The base chassis accessories for the Cisco ASR 9006 Router include:
•One plastic fan tray door accessory piece
•Two metal mounting brackets (left and right)
•Two chassis side brackets (left and right)
•Two plastic chassis corner pieces (left and right)
•Two screws for attaching the plastic fan tray door accessory piece
•Six screws for attaching the metal mounting brackets
•Six screws for attaching the side brackets
Note If you ordered the optional accessories set, see Installing Optional Chassis Accessories on the
Cisco ASR 9006 Router, page2-72 to install both the base and optional accessories.
If you did not order the optional accessory set, follow these steps to install the supplied base chassis
accessories on the Cisco ASR 9006 Router.
Step1 Attach the plastic accessory piece to the fan tray door using two supplied screws. Insert the screws
through the fan tray door from the inside of the door into the accessory piece (Figure2-61).
Step2 Attach the left metal mounting bracket to the front upper left corner of the chassis with three screws.