2-75
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure2-66 Installing Plastic Chassis Corners on the CiscoASR 9006 Router (Optional
Accessories Installation)
After the chassis has been installed in the rack and all chassis accessories have been attached, you can
install the fan trays, power supply modules, and RSP and line cards. See Chapter3, “Installing Cards
and Modules in the Chassis” for detailed installation instructions.
Installing Optional Air Baffles on the Cisco ASR 9006 Router
The Cisco ASR 9006 Router has an optional air baffle accessory kit (800-43858-01) for mounting the
router chassis in a 2-post or 4-post 19-inch rack. The accessory kit includes:
–
One plenum with two pre-installed front rack-mounting brackets for attaching plenum to front
side of rack-post
–
One support bracket
–
One plastic glide strip
–
Two rear rack-mounting brackets for attaching plenum to rear side of rack-post
–
Twelve 12-24 x 0.5 in. pan-head screws (six for attaching support bracket to chassis and six for
securing chassis to rack-mounted plenum)
–
Twelve 8-32 x 0.5 in. pan-head screws for attaching rear rack-mounting brackets on plenum
Air baffles allow for front-to-back air flow through the chassis and help isolate exhaust air from the
intake air.
1Plastic chassis corner piece attaches to
metal bracket at upper left corner of
chassis
2Plastic chassis corner piece attaches to
metal bracket at upper right corner of
chassis
249226
1
2