3-22
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter3 Installing Cards and Modules in the Chassis
Connecting Cables to the RSP or RP
Connecting Cables to the RSP or RP
This section describes how to connect cables to the console, auxiliary, and Ethernet ports on the RSP/RP.
The console and auxiliary ports are both asynchronous serial ports; any devices connected to these ports
must be capable of asynchronous transmission. For example, most modems are asynchronous devices.
Figure 3-16 shows an example of an RSP with data terminal and modem connections called out.
Figure3-16 RSP Console and Auxiliary Port Connections
Figure 3-17 shows an example of an RP with data terminal and modem connections called out.
1Console terminal 3RJ-45 Ethernet cables 5Auxiliary (AUX) port
2Modem 4Console port
243082
1
3
2
4
5