3-16
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter3 Installing Cards and Modules in the Chassis
Installing Cards in the Chassis
Figure3-10 Installing a Line Card into the CiscoASR 9912 Router Chassis
Step4 Repeat Step 1 through Step 3 for each line card.
Note In the Cisco ASR 9922 Router, up to ten line cards are installed in slots 0 through 9 in the top
card cage, and up to ten line cards are installed upside down in slots 10 through 19 in the bottom
card cage.
Step5 Go to the Connecting Line Card Network Interface Cables, page3-17 to connect the network interface
cables.
1Slide the card into the
chassis.
2Pivot the ejector levers to
seat the card into the
backplane connector.
3Tighten the captive screws.
3
2
1
303694