Cisco Systems 9000

2-73

CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide

Chapter2 Unpacking and Installing the Chassis

Installing Chassis Accessories

Installation of the optional accessory pieces also includes all base accessory pieces. If you ordered the

optional accessories set, follow these steps to install both the base and optional accessories:

Step1 Perform Step1 through Step 4 of the Installing Base Chassis Accessories on the Cisco ASR 9006 Router,

page 2-69.

Step2 Assemble and attach the two ball stud assemblies (Figure2-64) to each chassis side bracket. For each

assembly:

a. Align the two halves of the assembly to each other and to the screw holes in the chassis side bracket.

b. Insert and tighten two screws to secure the assembly to the side bracket.

Figure2-64 Installing Ball Stud Assemblies on the CiscoASR 9006 Router (Shown with Version 1

Power Syste m)

Step3 Attach the door to the upper chassis panel (Figure2-65) using two hex nuts per side to secure the door

hinges to the panel. Tighten the hex nuts to a torque of 4in-lb (0.45 N-m).

Caution Do not overtighten the hex nuts. They can be broken through overtightening.

248659