2-67
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure2-59 Installing the Hinge Brackets and L-Shaped Brackets on the CiscoASR9010 Router
Step7 Install the mid-cover with door lock (item 6 in Figure2-57) by engaging it to the upper four ball studs
and lining up the grooves in the top outside edges of the mid-cover with ridges at the bottom of the hinge
brackets.
Step8 Attach two doors to the hinge brackets (one per side). For each door:
a. Align the door hinge hole with the bracket hinge hole (Figure2-60).
b. Insert the captive pin in the door hinge through the hole in the bracket hinge.
1Install each hinge bracket, with an L-shaped
bracket attached, using four screws.
2After the hinge brackets are installed, secure
each L-shaped bracket to the cable
management tray and chassis with the screw
that you previously removed from that
location.
249244
1
2