2-93
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure2-84 Optional Rear Exhaust Air Deflector on the CiscoASR 9922 Router
After the chassis has been installed in the rack and all chassis accessories have been attached, you can
install the fan trays, power supply modules, RP cards, FCs and LCs. See Chapter3, “Installing Cards
and Modules in the Chassis,” for detailed installation instructions.
Installing Base Chassis Accessories on the Cisco ASR 9912 Router
The base chassis accessories for the Cisco ASR 9912 Router include (Figure2-85):
•One honeycomb cosmetic cover
•One vented bezel to cover the front of the power system
Step1 Attach the honeycomb cosmetic cover to the front of the chassis above the cable management bracket by
aligning the cover above the screw tabs on the chassis.
Step2 Attach the vented bezel cover by snapping it into place in front of the power system.
Note You will need to remove the vented bezel cover in order to install the power system. After the
power system is installed, you can re-install the vented bezel cover.
303591