2-62
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure2-55 Installing Ball Studs: Version 1 Power CiscoASR 9010Router (Base Accessories
Installation)
Step2 Attach two plastic strips (one per side) along the chassis front edge. The bottom tab of each strip attaches
to the hole about 2 inches above the ball stud locations (Figure2-56).
Step3 Attach the accessory grill to the chassis in front of the chassis grill. The top of the accessory grill attaches
to the ball studs.
Note You must install the lower fan tray before attaching the accessory grill. The lower fan tray slot is located
behind the accessory grill. See Installing Fan Trays, page3-4.
243457