Cisco Systems 9000 RSP/RP Port Specifications.

A-9
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
AppendixA Technical Specifications
RSP/RP Port Specifications.
DC Output Levels for Version 3 Power System
RSP/RP Port Specifications.
TableA-9 DC Output Levels for Version 3 Power System
Parameter Value
Voltage
Maximum –55.5 VDC
Nominal –54.0 VDC
Minimum –52.5 VDC
Power
Minimum (one power module) 4400 W
Maximum (four 4400 W DC power modules or three
6000 W AC power modules per tray x two trays)1
1. Maximum output power the power system is capable of supporting (not system power consumption).
35,200 W (DC) 36,000 W (AC)
(Cisco ASR 9010 Router only)
Maximum (four 4400W power modules or three 6000 W
AC power modules per tray x three trays)
52,800 W (DC) 54,000 W (AC)
(Cisco ASR 9912 Router only)
Maximum (four 4400 W power modules or three 6000 W
AC power modules per tray x four trays)
70,400 W (DC) 72,000 W (AC)
(Cisco ASR 9922 Router only)
TableA-10 RSP/RP Port Specifications
Description Value
Console por t EIA/TIA-232 RJ-45 interfac e, 9600 Baud , 8 data, no pa rity, 2 stop bits with
flow control none (default)
Auxiliary por t EIA/TIA-232 RJ-45 interfac e, 9600 Baud, 8 data, no parit y, 1 stop bit with
software handshake (default)
Management ports (0, 1) Dual-speed (100M/1000M) RJ-45
Sync ports (0, 1) Can be configured as one of the following:
•BITS (Building Integrated Timing System) port
•J.211 or UTI (Universal Timing Interface) port