By Vlan, Vlan ID | Cisco Systems DL-2159-05 specification

Chapter 5 Configuring Filters and QoS

Applying QoS

By VLAN

The default priority of a VLAN can be set, and the access point uses this setting for all traffic on that VLAN except when overridden by a filter setting. This filter setting is applied through the policy group on the VLAN.

Follow these steps to set up a VLANs QoS default priority.

Step 1 From the Setup page, click VLAN in the Associations section. The VLAN Setup page appears.

Step 2 Choose the VLAN to which you want to apply the priorities by highlighting it in the Existing VLANs field, and click Edit. The VLAN ID page for that VLAN appears (Figure 5-12).

Figure 5-12 VLAN ID page

Step 3 To view the selections in the Default Priority field, click the drop-down menu.

Step 4 Select the default priority you wish the VLAN to use.

Step 5 Click OK to save your settings and return to the VLAN Setup page.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

5-14	OL-2159-05

Image 102

Cisco Systems DL-2159-05 manual By Vlan, Vlan ID

Contents

Corporate Headquarters Text Part Number OL-2159-05 Copyright 2001-2003, Cisco Systems, Inc All rights reserved N T E N T S Iii Navigating Using the Map Windows Native Vlan ID WEP Not Set on the Wireless Phone Settings on the Authenticator Configuration Vii Event Notifications Setup Viii Setting Up Administrator Authorization Snmp Setup Ssid Xii Audience and Scope OrganizationXiii Conventions Tip Means the following are useful tipsXiv Related Publications Obtaining DocumentationCisco.com Documentation Feedback Documentation CD-ROMOrdering Documentation Xvi TAC Case Priority Definitions Obtaining Technical AssistanceCisco TAC Website Opening a TAC Case Xvii Obtaining Additional Publications and Information Xviii Overview A P T E R Key Features Quality of Service Support Management OptionsRoaming Client Devices Related Documents What is QoS?Limitations and Restrictions These documents are available on Cisco.com What is a VLAN? Vlan Support Incorporating Wireless Devices into VLANs Level of Access Vlan Example Network Configuration Examples Root Unit on a Wired LAN Repeater Unit that Extends Wireless Range Access Points as Root Units on a Wired LAN Central Unit in an All-Wireless Network Access Point as Repeater Using the Management Interfaces Using the Management Pages in the Web-Browser Interface Using the Web-Browser InterfaceUsing the Web-Browser Interface for the First Time Button/Link Description Navigating Using the Map Windows Map Window with Network Ports Pages Expanded Using the Command-Line Interface Preparing to Use a Terminal Emulator Changing Settings with the CLI Connecting the Serial CableSetting Up the Terminal Emulator Selecting Pages and Settings Function Description Using Snmp Using a Telnet SessionApplying Changes to the Configuration Supported MIBs Radio Configuration and Basic Settings Basic Settings Express Setup System Name Entering Basic SettingsExpress Setup page contains the following settings MAC Address Default IP Subnet Mask Configuration Server ProtocolDefault IP Address Default Gateway Root-Unit Access Points Security Setup Link Radio Network Optimization Optimize Radio Network For Radio Configuration Snmp Admin. CommunityRadio Network Compatibility Ensure Compatibility With Settings on the AP Radio Identification Entering Identity Information Default IP Subnet Mask Primary Port SettingsDefault IP Address Service Set ID Ssid Leap Password Entering Radio Hardware Information Settings on the AP Radio Hardware AP Radio Hardware page contains the following settingsAllow Broadcast Ssid to Associate? Enable World Mode Data Rates RTS Threshold Transmit PowerFrag. Threshold Max. RTS Retries Default Radio Channel Search for Less-Congested Radio ChannelRestrict Searched Channels Entering Advanced Configuration Information Receive Antenna and Transmit Antenna AP Radio Advanced Page for Internal Radio Requested Status Settings on the AP Radio AdvancedAP Radio Advanced pages contain the following settings Packet Forwarding Radio Cell Role Default Multicast Address FiltersMaximum Multicast Packets/Second Ssid For Use By Infrastructure Stations Use Aironet Extensions Classify Workgroup Bridges as Network Infrastructure Require Use of Radio Firmware Quality of Service Setup LinkVlan Setup Link Ethernet Encapsulation Transform Temporal Key Integrity Protocol Advanced Primary Ssid Setup LinkPreferred Access Points Broadcast WEP Key rotation interval sec Radio Modulation Radio Preamble Ethernet Configuration Non-Root Mobility Settings on the Ethernet Identification Entering Ethernet Hardware Information Settings on the Ethernet Hardware Ethernet Hardware page contains the following settingsSpeed Loss of Backbone Connectivity # of Secs Loss of Backbone Connectivity ActionLoss of Backbone Connectivity Ssid Settings on the Ethernet Advanced Ethernet Advanced page contains the following settings Default Unicast and Multicast Address Filters Default Unicast Address Filter Always Unblock Ethernet When STP is DisabledOptimize Ethernet for OL-2159-05 Configuring VLANs Settings on the Vlan Setup Vlan setup page contains the following settingsEntering Vlan Information Vlan Summary Status Link 802.1Q Encapsulation ModeMaximum Number of Enabled Vlan IDs Vlan 802.1Q Tagging Optionally allow Encrypted packets on the unencrypted Vlan Vlan Security PolicySingle Vlan ID which allows Unencrypted packets Vlan Name Parameter Native Vlan ConfigurationBroadcast Domain Segmentation TKIP/MIC Primary and Secondary SSIDs Deployment of Infrastructure and Non infrastructure Devices RADIUS-Based Vlan Access Control Vlan ID Criteria for Deploying Wireless VLANs Vlan Wireless Vlan Deployment Example 5shows the wireless Vlan deployment scenario described above Creating and Configuring VLANs on the Access Point Using the Configuration ScreensObtaining and Recording Vlan ID and Setup Information Creating the Native Vlan Vlan Setup Vlan ID #1 Setup Creating the Full- and Part-Time VLANs Creating the Maintenance Vlan Creating the Guest Vlan Creating and Configuring the SSIDs AP Radio Internal Service Sets Configuring VLANs Wireless Vlan Deployment Example Enabling Vlan 802.1Q Tagging and Identifying the Native Vlan 11 AP Radio Service Sets Guidelines for Wireless Vlan Deployment Creating an Ssid for Infrastructure Devices OL-2159-05 Configuring Filters and QoS Filter Setup Protocol Filtering Creating a Protocol Filter Enter a descriptive filter set name in the Set Name field Filter Set Enabling a Protocol Filter MAC Address Filtering Address Filters Creating a MAC Address Filter AP Radio Advanced AP Radio Primary Ssid QoS Configuration Settings on the Quality of Service Setup Use Symbol ExtensionsGenerate Qbss Element Send Igmp General Query Applying QoSBy Station Traffic Category 10 Protocol Filters Setup By Vlan 12 Vlan ID 13 Filters Priority Setting By Filter By CoS Value By Dscp Value Wireless QoS Deployment Example 17 Vlan Setup 18 Vlan ID #xx WEP Set on the Wireless Phone WEP Not Set on the Wireless Phone 20 AP Radio Internal Service Sets 21 AP Radio Internal Service Sets OL-2159-05 Configuring Proxy Mobile IP Proxy Mobile IP Introduction to Mobility in IP Nomadic Approach Mobile ApproachMobile IP Explained Mobile IP Environment Proxy Mobile IP Explained Mobile IP Traffic Pattern Before Deploying Proxy Mobile IP Issues to Consider While Deploying Proxy Mobile IP Components of a Proxy Mobile IP Network How Proxy Mobile IP Works Agent Discovery Subnet Map Exchange Home Agent Subnet Mask Registration Tunneling Proxy Mobile IP Setup Proxy Mobile IP Security Proxy Mobile IP Setup General Enable Proxy Mobile IP Authentication ServerSettings on the Proxy Mobile IP General Authoritative AP n Settings on the Authenticator Configuration Settings on the Local SA Bindings Local SA Bindings Settings on the Proxy Mobile IP Statistics Statistics Active AAP Authentication Failures for HAAuthentication Failures for FA MN IP Addresses Configuring Proxy Mobile IP Settings on the Subnet Map TableView Subnet Map Table Configuring Proxy Mobile IP on Your Wired LAN 11 a Sample Network 13 AP Radio Internal Service Sets 15 Proxy Mobile IP General 17 Subnet Map Table 18 Authenticator Configuration 20 Network Configuration Screen for an Access Point Client 22 Passed Authentication Screen Configuring Other Settings Server Setup Entering Time Server Settings Settings on the Time Server Setup Entering Boot Server Settings Settings on the Boot Server SetupBoot Server Setup page contains the following settings Bootp Server Timeout sec Configuration Server ProtocolUse Previous Configuration Server Settings Dhcp Multiple-Offer Timeout sec Dhcp Client Identifier Type Dhcp Requested Lease Duration minDhcp Minimum Lease Duration min Option Definition Dhcp Client Identifier Value Settings on the Web Server SetupWeb Server Setup page contains the following settings Dhcp Class Identifier Allow Non-Console Browsing Default Help Root URLDefault Web Root URL Http Port Default Domain Entering Name Server SettingsSettings on the Name Server Setup Domain Name System FTP Setup page contains the following settings Entering FTP SettingsSettings on the FTP Setup Domain Name Servers Routing Setup Entering Routing Settings New Network Route SettingsRouting Setup page contains the following settings Association Table Display Setup Installed Network Routes listAssociation Table Filters Configuring Other Settings Association Table Display Setup Settings on the Association Table Filters Stations to ShowFields to Show Bytes To/From Station Association Table AdvancedPackets To/From Station Primary Sort Settings on the Association Table Advanced Association Table Advanced Maximum number of bytes stored per Station Alert packet Rogue AP Alert Timeout minutesHandle Station Alerts as Severity Level Maximum Number of Forwarding Table Entries Settings on the Event Display Setup Event Notification SetupEvent Display Setup Default Activity Timeout seconds Per Device Class Severity Level at which to display events How should time generally be displayed?How should Event Elapsed non-wall-clock Time be displayed? Severity Level Description Event Handling Setup 10 The Event Handling Setup Handle Station Events as Severity Level Settings on the Event Handling SetupDisposition of Events Maximum number of bytes stored per Alert packet Event Notifications Setup Clear Alert StatisticsPurge Trace Buffer Snmp Trap Destination Settings on the Event Notifications SetupShould Notify-Disposition Events generate Snmp Traps? Snmp Trap Community Syslog Facility Number Should Syslog Messages use the Cisco Emblem Format?Syslog Destination Address Ieee Snmp Traps Should Generate the Following Notifications Security Setup Encrypting Radio Signals with WEP Security OverviewLevels of Security Additional WEP Security Features Network Authentication Types Sequence for EAP Authentication Wired LAN Client Combining MAC-Based, EAP, and Open Authentication Sequence for Open Authentication Setting Up WEP Protecting the Access Point Configuration with User Manager Key Access Point Associated Device Transmit? Key Contents Not set Enabling Message Integrity Check MIC Enabling Additional WEP Security FeaturesUsing Snmp to Set Up WEP Snmp Variable WEP Full WEP Off AP Radio Advanced Page for Internal Radio Enabling Temporal Key Integrity Protocol Tkip Enabling Broadcast WEP Key Rotation Setting Up Open or Shared Key Authentication Setting Up EAP Authentication Enabling EAP on the Access Point Firmware Version Draft 802.1x-2001 Access Point EAP Settings for Various Client Configurations Click Add New Access Server Enabling EAP in Cisco Secure ACS Setting Up a Repeater Access Point As a Leap Client Setting a Session-Based WEP Key Timeout AP Radio Identification Page for Internal Radio Setting Up MAC-Based Authentication Enabling MAC-Based Authentication on the Access Point 11 Authenticator Configuration Security Setup Setting Up MAC-Based Authentication 12 AP Radio Advanced Authenticating Client Devices Using MAC Addresses or EAP Enabling MAC-Based Authentication in Cisco Secure ACS Summary of Settings for Authentication Types Authentication Types Required SettingsLeap EAP-TLS, EAP-MD5 Radius Attributes Sent by the Access Point Attribute ID Description Acct-Authentic Acct-Delay-TimeAcct-Session-Id VSA attribute Nas-location Vlan-id Auth-algo-type Setting Up Backup Authentication Servers Acct-Terminate-Cause Setting Up Administrator Authorization 14 Security Setup Creating a List of Authorized Management System Users 16 User Management Window Click Add New User. The User Management window appears Setting up Centralized Administrator AuthenticationClick User Information. The User Information page appears Click Apply. You are returned to the User Information 18 Authenticator Configuration System Flow Notes Authorization Parameters Network Management Using the Association Table Setting the Display OptionsBrowsing to Network Devices Using Station Pages Station Information on Station Pages Station Identification and Status Rate, Signal, and Status Information To Station InformationFrom Station Information Performing Pings and Link Tests Hops and Timing InformationPerforming a Ping Performing a Link Test Click Link Test Using the Network Map Window Deauthenticating and Disassociating Client DevicesClearing and Updating Statistics Using Cisco Discovery Protocol Settings on the CDP Setup MIB for CDP Assigning Network Ports Port Assignments Enabling Wireless Network Accounting Settings on the Port Assignments Settings on the Accounting Setup Accounting Setup Accounting Attributes Attribute Definition Radiusipadr OL-2159-05 Managing Firmware and Configurations 10-1 Updating with the Browser from a Local Drive Full Update of the Firmware ComponentsUpdating Firmware 10-2 Selective Update of the Firmware Components 10-3 Updating from a File Server 10-4 Update All Firmware From File Server 10-5 Update Firmware From File Server 10-6 Retrieving Firmware and Web Page Files 10-7 Distributing Firmware 10-8 Distributing a Configuration 10-9 Limiting Distributions 10-10 Downloading the Current Configuration 10-11 Uploading from a File Server Uploading a ConfigurationUploading from a Local Drive 10-12 Resetting the Configuration 10-13 Restarting the Access Point 10-14 Management System Setup 11-1 Snmp Setup Settings on the Snmp Setup11-2 Using the Database Query Settings on the Database Query11-3 Console and Telnet Setup Changing Settings with the Database Query11-4 Settings on the Console/Telnet Using Secure Shell11-5 11-6 Special Configurations 12-1 Setting Up a Repeater Access Point 12-2 12-3 12-4 Using Hot Standby Mode 12-5 12-6 12-7 12-8 Sections in this chapter include 13-1 Selections on the Network Diagnostics Using Diagnostic PagesNetwork Diagnostics 13-2 Radio Diagnostics Tests 13-3 Vlan Summary Status SSIDs Int, Mod13-4 Network Ports 13-5 Identifying Information and Status Data Received13-6 Data Transmitted Ethernet Port13-7 Configuration Information Receive Statistics13-8 AP Radio Transmit Statistics13-9 13-10 AP Radio Port 13-11 Display Options 13-12 Display Settings Event Log13-13 Event Log Summary Log HeadingsSaving the Log 13-14 Using Command-Line Diagnostics Command Information Displayed13-15 Entering Diagnostic Commands 13-16 Diagnostic Command Results Eapdiag1on13-17 Eapdiag2on Vxdiagarpshow13-18 13-19 Vxdiagcheckstack 13-20 Vxdiaghostshow 13-21 Vxdiagi 13-22 Vxdiagipstatshow 13-23 Vxdiagmemshow 13-24 Vxdiagmuxshow 13-25 Vxdiagrouteshow 13-26 Vxdiagtcpstatshow 13-27 Vxdiagudpstatshow Reserving Access Point Memory for a Packet Trace Log FileTracing Packets 13-28 Tracing Packets for Specific Devices 13-29 Packets Stored in a Log File Tracing Packets for Ethernet and Radio PortsViewing Packet Trace Data 13-30 Checking the Top Panel Indicators Packets Displayed on the CLI13-31 Message Ethernet Status Radio Meaning Type Indicator 13-32 Finding an Access Point by Blinking the Top Panel Indicators 13-33 WEP Keys Checking Basic SettingsEAP Authentication Requires Matching 802.1x Protocol Drafts 13-34 Firmware Version Draft 13-35 Resetting to the Default Configuration 13-36 13-37 13-38 Channels, Power Levels, and Antenna Gains Channels Ieee 802.11aRegulatory Domains Maximum Power Levels and Antenna Gains Ieee 802.11b Regulatory Domain With 6-dBi Antenna Gain Maximum Power Level mWRegulatory Domain Antenna Gain dBi Maximum Power Level mW Americas -A 100 Eirp maximum 13.5 Emea -E MW Eirp maximum Regulatory Domain Antenna Gain dBi Maximum Power Level mW OL-2159-05 Protocol Filter Lists Protocol ISO Designator SVP UDP XNS-IDP ISO-TP4 ISO-CNLP CnlpVines Smtp Tsap TftpHttp POP2 IRC CmotBGP RIP Radius CVSRFE Event Log Messages Cisco Emblem Format Default FormatMessage Formats With a timestamp, messages look like this example Logemerg LoginfoSyslog Severity Emblem Severity Logalert Severity Event Description Mnemonic Recommended Action Message DescriptionsPossible Cause or Reason Device Host Newaddr SrchostIfDescr Desthost length pktLen Srchost to port ifDescr Reqlen bytes IfDescr error= errornum Packet from srchost to desthostDesthost on port ifDescr Srchost to desthost on port IfDescr error=erronumFor procedure on port ifDescr From srchost to desthost on port Srchost on port ifDescr Version Srchost to desthost of unknownDesthost Admin SysrebootRebootinf Prtrarpip Port device Status IfDescr errno=errno PktLen Xidexp ENC WEPUnenc Ethercon Media port Frame bytes Frame Port devName unit Username FailedUsername Unit Assoclost 1XVERHstndbyen Hstndbyeth Amngrreq InstkeyAcctcon Nulses Noaserv NorbufNosbuf Open VlanID IfIndex MIB IfIndex Awcmib Taskfailed NomibdkeyBadsize Taskstarted SsidIdx Statuses and Reasons Appendix C Event Log Messages Statuses and Reasons OL-2159-05 Numerics IN-1 CLI CDP MIBDhcp Dtim IN-3 Ethernet Locate unit by flashing LEDs Radio trafficIN-4 Pspf IN-5 SSH VlanIN-6 Warm restart IN-7 IN-8