Cisco Systems DL-2159-05 Updating Firmware, Updating with the Browser from a Local Drive, 10-2

Chapter 10 Managing Firmware and Configurations

Updating Firmware

Updating Firmware

You use the Cisco Services Setup page to update the access point’s firmware. You can perform the update by browsing to a local drive or by using FTP to update the firmware from a file server. Figure 10-1shows the Cisco Services Setup page.

Figure 10-1 Cisco Services Setup Page

Follow this link path in the browser interface to reach the Cisco Services Setup page:

1.On the Summary Status page, click Setup.

2.On the Setup page, click Cisco Services Setup.

Updating with the Browser from a Local Drive

When you update the firmware with your browser, you browse to your hard drive or to a mapped network drive for the new firmware. You can update the four firmware components—the management system firmware, the firmware web pages, and the radio firmware for both radios—individually or all at once. It is simplest to update all the components at once, but in some situations you might want to update them individually.

Full Update of the Firmware Components

To update all the firmware components at the same time, click Through Browser on the Fully Update Firmware line on the Cisco Services Setup page. The Update All Firmware Through Browser page appears. Figure 10-2shows the Update All Firmware Through Browser page.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

10-2 OL-2159-05