Cisco Systems DL-2159-05 manual Association Table Advanced, Packets To/From Station, Primary Sort

Chapter 7 Configuring Other Settings

Association Table Display Setup

Packets To/From Station

Use these settings to display packet volume information in the Association Table. Select Total to display the total number of packets to and from each station on the network.

Select Alert to display the number of alert packets to and from each station on the network for which you have activated alert monitoring. Select the Alert checkbox on a device’s Station page to activate alert monitoring for that device. See the “Using Station Pages” section on page 9-3for details on Station pages.

The Total and Alert selections both add a column to the Association Table.

Bytes To/From Station

Use these settings to display byte volume information in the Association Table. Select Total to display the total number of bytes to and from each station on your wireless network. Select Alert to display the number of alert bytes to and from each station on the wireless network. Both selections add a column to the Association Table.

Primary Sort

This setting determines the information that appears in the first column in the Association Table. Choices available are:

•Device

•IP Address or domain name

•MAC Address

•VLAN

•SSID

•Class

•Parent

Secondary Sort

This setting determines the information that appears in the second column in the Association Table. All primary sort options, except Parent, are available for the secondary sort.

Association Table Advanced Page

You use the Association Table Advanced page to control the total number of devices the access point can list in the Association Table and the amount of time the access point continues to track each device class when a device is inactive. Figure 7-8shows the Association Table Advanced page.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

7-16 OL-2159-05