Cisco Systems DL-2159-05 manual 10-5, Update All Firmware From File Server

Chapter 10 Managing Firmware and Configurations

Updating Firmware

Figure 10-4 Update All Firmware From File Server Page

Follow these steps to update all three firmware components from a file server:

Step 1 Click the File Server Setup link to enter the FTP settings. The FTP Setup page appears. Figure 10-5shows the FTP Setup page.

Figure 10-5 FTP Setup Page

Step 2 Enter the FTP settings on the FTP Setup page.

a.Select FTP or TFTP from the File Transfer Protocol pull-down menu. FTP (File Transfer Protocol) is the standard protocol that supports transfers of data between local and remote computers. TFTP (Trivial File Transfer Protocol) is a relatively slow, low-security protocol that requires no user name or password.

b.In the Default File Server entry field, enter the IP address of the server where the access point should look for FTP files.

c.In the FTP Directory entry field, enter the directory on the server where FTP files are located.

d.In the FTP User Name entry field, enter the user name assigned to the FTP server. If you selected TFTP, you can leave this field blank.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05 10-5