Cisco Systems DL-2159-05 manual Association Table Display Setup, Association Table Filters

Chapter 7 Configuring Other Settings

Association Table Display Setup

Installed Network Routes list

The list of installed routes provides the destination network IP address, the gateway, and the subnet mask for each installed route.

Association Table Display Setup

You use the Association Table Filters and the Association Table Advanced pages to customize the display of information in the access point’s Association Table.

Association Table Filters Page

Figure 7-7shows the Association Table Filters page.

Figure 7-7 Association Table Filters Page

Follow this link path to reach the Association Table Filters page:

1.On the Summary Status page, click Setup.

2.On the Setup page, click Display Defaults under Associations.

You can also reach the Association Table Filters page through the “additional display filters” link on the Association Table page. When you reach the page through the “additional display filters” link, four buttons appear at the bottom of the page that are different from the standard buttons on management system pages. The buttons include:

•Apply—Applies your selections to the Association Table and returns you to the Association Table page.

•Save as Default—Saves your selections as new default settings and returns you to the Association Table page.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05 7-13