Cisco Systems DL-2159-05 manual Settings on the Time Server Setup

Chapter 7 Configuring Other Settings

Server Setup

Settings on the Time Server Setup Page

The Time Server Setup page contains the following settings:

•Simple Network Time Protocol

•Default Time Server

•GMT Offset (hr)

•Use Daylight Savings Time

•Manually Set Date and Time

The page also displays the IP address of the current time server, if one is assigned.

Simple Network Time Protocol

Select Enabled or Disabled to turn Simple Network Time Protocol (SNTP) on or off. If your network uses SNTP, select Enabled.

Default Time Server

If your network has a default time server, enter the server’s IP address in the Default Time Server entry field.

The Current Time Server line under the entry field reports the time server the access point is currently using.

Note The DHCP or BOOTP server can override the default time server.

GMT Offset (hr)

The GMT Offset pull-down menu lists the world’s time zones relative to Greenwich Mean Time (GMT). Select the time zone in which the access point operates.

Use Daylight Savings Time

Select yes to have the access point automatically adjust to Daylight Savings Time.

Manually Set Date and Time

Enter the current date and time in the entry fields to override the time server or to set the date and time if no server is available.

When entering the date and time, use forward-slashes to separate the year, month, and day, and use colons to separate the hours, minutes, and seconds. For example, you would enter 2003/02/17 for February 17, 2003, and 18:25:00 for 6:25 pm.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05 7-3