Cisco Systems DL-2159-05 manual Selecting Pages and Settings, Function Description

Chapter 2 Using the Management Interfaces

Using the Command-Line Interface

Table 2-2 Common Functions on CLI Pages

Function	Description
Press Enter	Refreshes the page and cancel changes to settings.
three times
Ctrl-R	Refreshes the page and cancel changes to settings.
=	Returns to the home page without applying changes.
:back	Moves back one page without applying changes.
:bottom	Jumps to the bottom of a long page, such as Event Log. When
	you are at the bottom of a page, this function becomes :top.
:down	Moves down one page length (24 lines) on a long page, such
	as Event Log. When you are at the bottom of a long page, this
	function becomes :up.

You can also enter diagnostic commands in the CLI. See the “Using Command-Line Diagnostics” section on page 13-15for information on the CLI diagnostic commands.

Figure 2-4shows a CLI page example.

Figure 2-4 CLI Page Example

Selecting Pages and Settings

When you type names and settings that appear in brackets you jump to that page or setting. HyperTerminal jumps to the page or setting as soon as it recognizes a unique name, so you only need to type the first few characters in the page or setting name. To jump from the home page to the Setup page, for example, you only need to type se.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

2-6 OL-2159-05