Cisco Systems DL-2159-05 manual AP Radio Advanced

Chapter 8 Security Setup

Setting Up MAC-Based Authentication

Figure 8-12 AP Radio Advanced Page

Step 16 Select Disallowed from the pull-down menu for Default Unicast Address Filter for each authentication type requiring MAC-based authentication.

For example, if the radio is configured for both open and Network-EAP authentication, you could set Default Unicast Address Filter under Open to Disallowed but leave Default Unicast Address Filter under Network-EAP set to Allowed. This configuration forces client devices using open authentication to authenticate using MAC addresses but does not force LEAP-enabled client devices to authenticate using MAC addresses. To force all client devices to authenticate using MAC addresses, select Disallowed for all the enabled authentication types.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

8-24 OL-2159-05