Cisco Systems DL-2159-05 manual Network Configuration Screen for an Access Point Client

Chapter 6 Configuring Proxy Mobile IP

Configuring Proxy Mobile IP

Step 5 Define an entry for each Proxy Mobile IP-enabled access point (Figure 6-20).

Figure 6-20 Network Configuration Screen for an Access Point Client

Step 6 Add a User entry for each mobile node (client device). Use the “cisco-av-pair” syntax as detailed in Figure 6-21.

Figure 6-21 User Setup Screen

Note If this option does not appear, enable it for the specific user or an entire group under Interface Configuration, “Radius (Cisco IOS/PIX)”, “cisco-av-pair”)

Step 7 Refer to the authentication logs and verify that all devices are communicating properly with the ACS server (Figure 6-22).

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05 6-25