Cisco Systems DL-2159-05 manual VlanID

Appendix C Event Log Messages

Message Descriptions

Table C-1 Event Log Messages and Descriptions (continued)

				EMBLEM	Possible Cause or
		Severity	Event Description	Mnemonic	Recommended Action
		Protocol	Unable to start SSH connection	SSHD_CON_	Reboot the access point.
		Warning		INIT_FAILED
		Protocol	Disconnect remote user from	SSHD_LOGIN_	None.
		Information	ipAddr after exceeding max	FAILED
			number of login attempts
			ipAddr: IP address of SSH client
		Protocol	CRC compensation attack is	SSHD_CRC_	A user attacked a known
		Warning	detected. Disconnect remote	ATTACK	security hole in the SSH
			user from ipAddr		protocol. Find and remove the
			ipAddr: IP address of SSH client		user or disable SSH.
		System	BKeyRotation declared before	BKR_NOT_INIT	Ignore this message unless it
		Warning	proper initialization		appears after bootup. If it
					appears after bootup, check the
					configuration and reboot the
					access point.
		System	BKeyRotation declared before	BKR_VLAN_	Ignore this message unless it
		Warning	initialization for VLAN vlanID.	NOT_INIT	appears after bootup. If it
			vlanID: numeric VLAN		appears after bootup, check the
			identifier		configuration and reboot the
					access point.
		System	Vlan vlanID is not Enabled.	BKR_VLAN_	Ignore this message if the
		Warning	vlanID: numeric VLAN	DISABLED	VLAN rotation period has been
			identifier		set to 0. If the VLAN rotation
					period is set to a value higher
					than 0, check the configuration
					and reboot the access point.
		System	Vlan vlanID Key Rotation	BKR_KEY_	Ignore this message if the
		Warning	Interval is 0.	0PERIOD	VLAN rotation period has been
			vlanID: numeric VLAN		set to 0. If the VLAN rotation
			identifier		period is set to a value higher
					than 0, check the configuration
					and reboot the access point.
		System	VLAN vlanID Key Index and	BKR_VLAN_	Correct the VLAN
		Warning	Count are in conflicting states.	CONFLICT	configuration and reboot the
			vlanID: numeric VLAN		access point.
			identifier
		System	No WID timer for VLAN vlanID	BKR_VLAN_	Correct the VLAN
		Warning	vlanID: numeric VLAN	NOWIDTIMER	configuration and reboot the
			identifier		access point.
		System Fatal	BKeyPrivate1ISR msgQSend	BKR_STOP_	Correct the VLAN
			error, too many VLANs.	SENDERR	configuration and reboot the
			Rotation stopped for VLAN		access point.
			vlanID.
			vlanID: numeric VLAN
			identifier
	Cisco Aironet 1200 Series Access Point Software Configuration Guide
C-24					OL-2159-05