Cisco Systems DL-2159-05 manual Settings on the Web Server Setup, Dhcp Client Identifier Value

Chapter 7 Configuring Other Settings

Server Setup

DHCP Client Identifier Value

Use this setting to include a unique identifier in the access point’s DHCP request packet. This field contains the access point’s MAC address by default. If you select Other - Non Hardware from the DHCP Client Identifier Type pull-down menu, you can enter up to 255 alphanumeric characters. If you select any other option from the DHCP Client Identifier Type pull-down menu, you can enter up to 12 hexadecimal characters. Hexadecimal characters include the numbers 0 through 9 and the letters A through F.

DHCP Class Identifier

Your DHCP server can be set up to send responses according to the group to which a device belongs. Use this field to enter the access point’s group name. The DHCP server uses the group name to determine the response to send to the access point. The access point’s DHCP class identifier is a vendor class identifier.

Entering Web Server Settings and Setting Up Access Point Help

You use the Web Server Setup page to enable browsing to the web-based management system, specify the location of the access point Help files, and enter settings for a custom-tailored web system for access point management. Figure 7-3shows the Web Server Setup page:

Figure 7-3 Web Server Setup Page

Follow this link path to reach the Web Server Setup page:

1.On the Summary Status page, click Setup.

2.On the Setup page, click Web Server under Services.

Settings on the Web Server Setup Page

The Web Server Setup page contains the following settings:

•Allow Non-Console Browsing

•HTTP Port

•Default Help Root URL

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05 7-7