Cisco Systems DL-2159-05 manual Nomibdkey, Badsize, Taskfailed, Taskstarted, Tac, Nready, Bkrxmit

Appendix C Event Log Messages

Message Descriptions

Table C-1 Event Log Messages and Descriptions (continued)

				EMBLEM	Possible Cause or
		Severity	Event Description	Mnemonic	Recommended Action
		System	BKey1Proc can't access	BKR_KEY1_	Correct the system
		Warning	AWC_MIB's DefaultKey for	NOMIBDKEY	configuration and reboot the
			devEnhCtrl Index radioIndex		access point.
		System	BKey1Proc is started before	BKR_KEY1_	Ignore this message unless it
		Warning	proper initialization	NOT_INIT	appears after bootup. If it
					appears after bootup, check the
					configuration and reboot the
					access point.
		System	BKey1Proc has bad msg size or	BKR_KEY1_	If this message persists, check
		Warning	Xmit fatal error	BADSIZE	the signal strength of associated
					client devices.
		System	BKey start task error	BKR_KEY1_	If this message persists, correct
		Warning		TASK_FAILED	the system configuration and
					reboot the access point.
		System	BKey task already started	BKR_KEY1_	If this message persists and does
		Warning		TASK_STARTED	not seem to have been triggered
					by a change to the system
					configuration, contact Cisco
					TAC.
		System	BKey declared before VLAN	BKR_VLAN_	Ignore this message unless it
		Warning	vlanID is ready.	NREADY	appears after bootup. If it
			vlanID: numeric VLAN		appears after bootup, check the
			identifier		configuration and reboot the
					access point.
		System Fatal	BKeyXmit with VLAN vlanID	BKR_XMIT_	Ignore this message if the
			not ready. Key rotation stopped.	VLAN_NREADY	VLAN rotation period has been
			vlanID: numeric VLAN		set to 0. If the VLAN rotation
			identifier		period is set to a value higher
					than 0, check the configuration
					and reboot the access point.
		System	BKeyXmit finds no entry for	BKR_XMIT_	Ignore this message if the
		Warning	VLAN vlanID.	NOVLAN	VLAN rotation period has been
			vlanID: numeric VLAN		set to 0. If the VLAN rotation
			identifier		period is set to a value higher
					than 0, check the configuration
					and reboot the access point.
		System	BKeyXmit terminating	BKR_XMIT_	None.
		Information	BKeyRotation for vlanId vlanID.	VLAN_STOP
			vlanID: numeric VLAN
			identifier
		System	Bkey-MarkTime	BKP_MARK	None.
		Information
		System	BKeyXmit can't access	BKR_XMIT_	Correct the system
		Warning	AWC_MIB's DefaultKey	NOMIBKEY	configuration and reboot the
					access point.
	Cisco Aironet 1200 Series Access Point Software Configuration Guide
C-26					OL-2159-05