Cisco Systems DL-2159-05 Entering Identity Information, Settings on the AP Radio Identification

Chapter 3 Radio Configuration and Basic Settings

Radio Configuration

Entering Identity Information

Use the AP Radio Identification pages to enter basic locating and identity information for the access point radios. The internal radio and the radio module both have an AP Radio Identity page. Both pages contain the same settings. Figure 3-4shows the AP Radio Identification page for the internal radio.

Figure 3-4 The AP Radio Identification Page for the Internal Radio

Follow this link path to reach the AP Radio Identification page:

1.On the Summary Status page, click Setup.

2.On the Setup page, click Identification in on eof the AP Radio rows under Network Ports.

Settings on the AP Radio Identification Page

The AP Radio Identification pages contain the following settings:

•Primary Port Settings

•Default IP Address

•Default IP Subnet Mask

•Service Set ID (SSID)

•LEAP User Name

•LEAP Password

The page also displays the access point’s MAC address, the radio serial number, the radio’s current IP address, the radio’s current IP subnet mask, the maximum packet length that the radio can send and receive, the radio firmware version, and the radio boot block version.

Cisco Aironet 1200 Seres Access Point Software Configuration Guide

3-8 OL-2159-05