Cisco Systems DL-2159-05 manual Routing Setup

Chapter 7 Configuring Other Settings

Routing Setup

•FTP Directory

•FTP User Name

•FTP User Password

File Transfer Protocol

Use the drop-down menu to select FTP or TFTP (Trivial File Transfer Protocol). TFTP is a relatively slow, low-security protocol that requires no username or password.

Default File Server

Enter the IP address or DNS name of the file server where the access point should look for FTP files.

FTP Directory

Enter the file server directory that contains the firmware image files.

FTP User Name

Enter the username assigned to your FTP server. You don’t need to enter a name in this field if you select TFTP as the file transfer protocol.

FTP User Password

Enter the password associated with the file server’s username. You don’t need to enter a password in this field if you select TFTP as the file transfer protocol.

Routing Setup

You use the Routing Setup page to configure the access point to communicate with the IP network routing system. You use the page settings to specify the default gateway and to build a list of installed network route settings. Figure 7-6shows the Routing Setup page.

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05 7-11