Cisco Systems MeetingPlace Video Integration About Managing User Profiles for Video Use

4-10
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter4 Configuring and Managing Cisco MeetingPlaceVideo Integration
About Managing User Profiles for Video Use
Step 1 Use the information in this section to calculate the number of video overbook port s.
Step 2 Enter the number of video overbook ports in the Video overbook ports field in MeetingTime: Click the
Configure tab, then click Server Configuration, then scroll down in the panel on the right to Video
overbook ports.
About Managing User Profiles for Video Use
Use profile settings for users and groups to manage v ideo-conferencing resources and simplify video
conferencing for users.
Users can be assigned to groups to simplify assigning privileges and parameters. Enter settings in the
MeetingTime application using the table in this section
Manage the use of video resources by doing the fol lowing:
•Controlling which users and groups can schedule video c onferences. There are no restrictions on
attending video conferences.
•Prioritizing bandwidth use by assigning profiled users and groups d efault bandwidths.
By default, video conferencing is not enabled in user profiles, and video endpoint bandwidth is set to the
maximum, 384 kbps.
Tabl e 4-4 shows settings for groups; Ta ble 4-5 shows settings for individual profiled users.
Table4-4 Available Settings For Each Group
Item Values Where to Configure in MeetingTime
Allow Video Scheduling? No
Yes
In the specific User Group profile, in
the Restrictions section.
Endpoint Bandwidth
This value is the default bandwidth
for the group to which a user has
been assigned.
For more information about
bandwidth use, see About
Video-Conferencing Bandwidth,
page 4-12.
128K
256K
384K (Default)
In the specific User Group profile, in
the Video Meetings section.