CHAPTER
3-1
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
3
Installing Cisco MeetingPlace Video Integration
Perform the following tasks to set up CiscoMeetingPlace Video Integration:
•Before You Install, page 3-1
•Installing Cisco MeetingPlace Video Integration, page 3-18
•Uninstalling Cisco MeetingPlace Video Integration, page 3-19

Before You Install

Complete the following tasks in order before you run the Cisco MeetingPlace Video Integration
installer:
•Making Sure Component Systems Are Up and Running, page 3-1
•Verifying your Video-Conferencing License, page 3-2
•About Configuring the Cisco IPVC MCU to Use Cisco MeetingPlace, page 3-2
•Configuring the Cisco MeetingPlace Audio Server, page 3-11
•Configuring Cisco MeetingPlace H.323/SIP IP Gateway, page 3-12
•Configuring Load-Balancing Configurations for Video Conferencing, page 3-12
•About Installing and Configuring Video Endpoints, page 3-13
•(Optional) Configuring Cisco MeetingPlace for Outlook, page 3-14
•(Optional) Configuring CiscoMeetingPlace for Lotus Notes, page 3-14
•Configuring Cisco CallManager, page 3-14
•Preparing to Install the Video Integration with DMZ Configurations, page 3 -17
•Gathering Installation Values, page 3-18

Making Sure Component Systems Are Up and Running

Several component systems must be working independently before you prepare to install
Cisco MeetingPlaceVideo Integration.
Step 1 Make sure that the following are true: