3-8
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter3 Installing Cisco MeetingPlace V ideo Integration
Before You Install
Making Sure that a Conference Password Is Not Required
Step 1 Click the Management button.
The Management Settings dialog box appears.
Step 2 Make sure that password-related parameters are unchecked.
Step 3 Click OK.
The Add Services dialog box appears.
Setting Conference View Parameters
When you set view parameters, use the Cisco MeetingPlace service template as a model. The templates
are described in Using Preconfigured Service Templates, page 3-5. A Voice Activated view allows
participants to View Active Speaker, while a Continuous Presence view allows participants to View
Multiple People.
Note • One Voice Activated, 1-participant layout is required. A Continuous Presence view is optional, if
your hardware supports it.
•Do not create multiple identical views for a single service code. Each view must be unique.
General Instructions for Setting View Parameters
Step 1 Click the edit view icon.
The Edit View dialog box appears.
Step 2 In the “Use Processor” field, click the type of media processor that you want this service to use.
Note The MP and RM option does not support Cisco MeetingPlace.
•Click MP to specify that the service only uses the local media processor to process video conference
calls.
•Click EMP to specify that the service uses the Cisco IPVC Enhanced Media Processor (EMP)
register with the Cisco IPVC MCU to process video conference calls.
•Click Auto to allow the Cisco IPVC MCU to choose the media processor the Cisco IPVC MCU will
use to process a specific video conference.
Note See Cisco IP/VC 3511 MCU and Cisco IP/VC 3540 MCU Module Administrator Guide ,
Version 3.2 for information about registering a media processor with the Cisco IPVC MCU .
Step 3 In the “Video Picture Size” field, click the video format that you anticipate most endpoints will use.
Step 4 To enable the CiscoIPVC MCU to switch the video to the speaker who is speaking the loudest, check
Enable voice activate.