4-11
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
OL-6280-01
Chapter4 Configuring and Managing Cisco MeetingPlace Video Integration
About Managing User Profiles for Video Use
Table4-5 Configure For Each User
Item Values Where to Configure
Allow video scheduling?
Users who are allowed to schedule
meetings will see the video scheduling
option when they schedule a meeting.
Otherwise, the video scheduling option will
not appear on the scheduling form.
No
Yes
Group Dflt (Group Default)
In the profile of the user,
in the Restrictions
section
Endpoint Bandwidth
The default video endpoint bandwidth of
this user.
For more information about bandwidth use,
see About Video-Conferencing Bandwidth,
page 4-12.
•128 kbps
•256 kbps
•384 kbps
•Group Dflt (Group
Default: the bandwidth
set for the group to
which this user is
assigned)
The default bandwidth is
384kbps.
In the profile of the user,
in the Video Meetings
section.
Endpoint Address
Default video endpoint address that Cisco
MeetingPlace outdials to bring the user into
the video conference.
Entering a value for this parameter
simplifies for users the process of attending
video conferences.
For H.323 or SCCP
endpoints:
Enter the E.164 phone
number of the endpoint of
the user.
For ISDN endpoints:
Precede the E.164 phone
number of the video
endpoint with the service
code of the Cisco IPVC PRI
Gateway. For example, if the
phone number of the ISDN
video endpoint is
1-800-555-0101, and the
service prefix for the type of
call that is appropriate for
that endpoint is 89, enter
8918005550101. For
information, see the
documentation for your
Cisco IPVC PRI Gateway.
In the profile of the user,
in the Video Meetings
section.