ASIC Driver Commands on Cisco IOS XR Software
show controllers pse mp
show controllers pse mp
To display packet switching engine (PSE) information for the maintenance processor on a specific controller or node, use the show controllers pse mp command in EXEC mode.
show controllers pse mp [egress ingress] [location
Syntax Description
Defaults
Command Modes
Command History
egress | (Optional) Displays information for the egress PSE device | |
| only. | |
| Note Follow the egress argument with the location | |
| argument to restrict the command to a specific node. | |
|
|
|
ingress | (Optional) Displays information for the ingress PSE device | |
| only. | |
| Note Follow the ingress argument with the location | |
| ||
| specific node. | |
|
|
|
location | (Optional) Identifies the location of the node whose PSE | |
| device information you want to display. The | |
| expressed in the rack/slot/module notation. | |
| Note Use the show platform command to see the location | |
| of all nodes installed in the router. | |
| Note Include the instance {0 1} argument before the | |
| location | |
| a specific device instance on the specified node. | |
|
| |
No default behavior or values | ||
EXEC |
|
|
|
| |
Release | Modification |
|
|
|
|
Release 2.0 | This command was introduced on the Cisco | |
|
|
|
Release 3.0 | No modification. | |
|
|
|
Release 3.2 | No modification. | |
|
|
|
Release 3.3.0 | No modification. | |
|
|
|
Release 3.4.0 | No modification. | |
|
|
|
Release 3.5.0 | No modification. | |
|
|
|
Release 3.6.0 | No modification. | |
|
|
|
| Cisco IOS XR Advanced System Command Reference |
|
