ASIC Driver Commands on Cisco IOS XR Software
clear controller ingressq statistics
AR-36
Cisco IOS XR Advanced System Command Reference
OL-14340-01
clear controller ingressq statistics
To clear application-specific integrated circuit (ASIC) statics from the ingress fabric queue on a specific
node, or on all nodes installed in the router, use the clear controller ingressq statistics command in
EXEC mode.
clear controller ingressq statistics location node-id
Syntax Description
Defaults Enter the clear controller ingressq statistics command without the optional location node-id keyword
argument to clear the ASIC statistics from the ingress queues on all nodes that are installed in the router.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Only locations that contain a fabric queue ASIC can be specified for the location node-id.
The clear controller ingressq statistics command is intended for use while performing special
maintenance, test, or debugging procedures. You do not need to use this command when fabric
connectivity is performing normally.
Task ID
location node-id Identifies the node whose ASIC statistics you want to clear from the ingress
fabric queue. The node-id argument is entered in the rack/slot/module
notation.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 No modification.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 The location node-id keyword and argument were changed from optional to
required.
Task ID Operations
drivers read, write