ASIC Driver Commands on Cisco IOS XR Software
show controllers egressq eio links
AR-62
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers egressq eio links
To display Elastic I/O (EIO) information for the egress queueing ASIC, use the show controllers
egressq eio links command in EXEC mode.
show controllers egressq eio links {link-id | all} location node-id
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
link-id Identifies the EIO link whose egress queueing ASIC information you want
to display. Replace link-id with a link identifier. Range is from 0 through
4294967295.
all Displays egress queueing ASIC information for all links on the specified
node.
location node-id Identifies the location of the egress queue manager whose EIO link
information you want to display. The node-id is expressed in the
rack/slot/module notation.
Release Modification
Release 3.2 This command was introduced on the Cisco CRS-1.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 No modification.
Task ID Operations
drivers read
interface read