ASIC Driver Commands on Cisco IOS XR Software
show controllers pse eio links
AR-98
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers pse eio links
To display packet switching engine (PSE) information for Elastic I/O (EIO) links, use the show
controllers pse eio links command in EXEC mode.
show controllers pse eio links {link-number | all} [location node-id]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
links link-number Displays PSE information for the specified link. Replace link_number
with a link number in the range from 1 through 4294967295.
Note Use the show controllers pse eio links all location node-id
command to display all available EIO link IDs on a node.
links all Displays PSE information for all links on the specified node.
location node-id (Optional) Displays all EIO links on a specific node only. The node-id
is expressed in the rack/slot/module notation.
Note Use the show platform command to see the location of all nodes
installed in the router.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 No modification.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 The link-number range of 1 through 4294967295 has changed to 0 through
4294967295.
Task ID Operations
drivers read
interface read