ASIC Driver Commands on Cisco IOS XR Software
show controllers plim asic ingress-channel bay
AR-85
Cisco IOS XR Advanced System Command Reference
OL-14340-01
Examples The following example shows sample output from the show controllers plim asic ingress-channel bay command:RP/0/0/CPU0:router# show controllers plim asic ingress-channel bay 0 channel 0 location
0/4/CPU0
Host bay 0 Rx SPI4.2 channel 0 :
============================================
Ifname : DATA_PORT_0
SPI4.2 Channel state : provisioned
Bay number : 0
Rx SPI4.2 channel number : 0
Internal Buffer number : 0
Rx edram buffer start address : 0x0
Rx edram buffer end address : 0x31fff
Rx edram buffer size : 0x32000
Rx length buffer start address : 0x0
Rx length buffer end address : 0x63ff
Rx length buffer size : 0x6400
Number of calendar entries : 1
Quantum : 209714
RxEDRAM buffer threshold settings:
==================================
------------------ <-- Buffer Start (0x0)
| |
|------------------|<-- SPI4 AEmpty0 (0x6400)
| |
| |
|------------------|<-- SPI4 AEmpty1 (0xc800)
| |
| |
| |
| |
| |
| |
|------------------|<-- SPI4 AFull 0 (0x1f400)
| |
| |
|------------------|<-- SPI4 AFull 1 (0x25800)
| |
| |
|------------------|<-- Buffer Full (0x2bc00)
| |
------------------ <-- Buffer End (0x31fff)
RxLen EDRAM buffer threshold settings:
======================================
------------------ <-- Buffer Start (0x0)
| |
|------------------|<-- SPI4 AEmpty0 (0xc80)
| |
| |
|------------------|<-- SPI4 AEmpty1 (0x1900)
| |
| |
| |
| |
| |
| |