ASIC Driver Commands on Cisco IOS XR Software
show controllers plim asic
show controllers plim asic ingress-channel bay
To display statistical information for the SPI4.2 receive channel on a physical layer interface module (PLIM) ASIC, use the show controllers plim asic
show controllers plim asic
Syntax Description
Defaults
Command Modes
Command History
0 | Displays statistical information for the SPI4.2 receive channel that is |
| located in the bottom bay. |
|
|
1 | Displays statistical information for the SPI4.2 receive channel that is |
| located in the top bay. |
channel channel_number Identifies the receive channel whose statistics you want to display.
| Replace channel_number with the number of the channel whose |
| statistics you want to display. Range is from 1 through 255. |
|
|
location | Identifies the location of the PLIM whose ASIC information you want |
| to display. The |
| Note Use the show platform command to see the location of all nodes |
| installed in the router. |
|
|
No default behavior or values
EXEC
Release | Modification |
Release 3.2 | This command was first supported on the Cisco XR 12000 Series Router. |
|
|
Release 3.3.0 | No modification. |
|
|
Release 3.4.0 | No modification. |
|
|
Release 3.5.0 | The show controllers plim asic |
| the show controllers plim asic |
|
|
Release 3.6.0 | No modification. |
|
|
Usage Guidelines |
| To use this command, you must be in a user group associated with a task group that includes the proper | ||
|
| task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on | ||
|
| Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide. | ||
|
|
|
|
|
Task ID |
| Task ID | Operations |
|
|
|
|
|
|
|
| interface | read | |
|
|
|
|
|
|
| read | ||
|
|
|
|
|
| Cisco IOS XR Advanced System Command Reference |
|
