ASIC Driver Commands on Cisco IOS XR Software
asic-scan pse egress (block number)
AR-10
Cisco IOS XR Advanced System Command Reference
OL-14340-01
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Note This command should be used only with Cisco support supervision. Incorrect usage of this
command can accidentally remove the relevant card from service.
Task ID
Examples The following example shows how to display a list of all error causes in the specified block of a PSE
device:
RP/0/RP0/CPU0:router# asic-scan pse egress 10 help-cause location 0/6/CPU0
Total 6 cause(s)
Cause Number Cause Name
0 lbm_owl_ovl
1 scr_m4_ovl
2 scr_m3_ovl
3 scr_m2_ovl
4 scr_m1_ovl
5 scr_m0_ovl
The following example shows how to run a scan on the PSE ASIC block ID 30 located on the CPU node
in slot 1:
RP/0/RP0/CPU0:router# asic-scan pse egress 30 location 0/6/CPU0
Task ID Operations
drivers read, write