ASIC Driver Commands on Cisco IOS XR Software
clear controller egressq queue
AR-31
Cisco IOS XR Advanced System Command Reference
OL-14340-01
clear controller egressq queue
To clear a specific controller egress queue, use the clear controller egressq queue command in EXEC
mode.
clear controller egressq queue queue-id1 [queue-id2] location node-id
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Note If you enter the optional [queue-id2] argument after you enter the queue-id1 argument, then the
queue-id1 argument specifies the first queue in a range of queues to be cleared. If you enter the queue-id1
argument without specifying the queue-id2 argument, then only the queue specified for queue-id1 is
cleared.
queue-id1 Queue you want to clear. Replace queue-id1 with a queue number.
Range is from 1 through 8191.
queue-id2 (Optional) Last queue in a range of queues to clear. Replace queue-id2
with a queue number. Range is from 1 through 8191.
location node-id Identifies the location of the node whose egress queue you want to clear.
The node-id is expressed in the rack/slot/module notation.
Note Use the show platform command to see the location of all nodes
installed in the router.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 No modification.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 No modification.