ASIC Driver Commands on Cisco IOS XR Software
show controllers ingressq statistics
AR-78
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers ingressq statistics
To display ingress queue manager statistics, use the show controllers ingressq statistics command in
EXEC mode.
show controllers ingressq statistics [location node-id]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Note In the show controllers ingressq statistics command display, the rx pkts counter field may wrap if it is
calculating line rate traffic.
Task ID
location node-id Identifies the location of the ingress queue whose statistics you want to
display. The node-id is expressed in the rack/slot/module notation.
Note Use the show platform command to see the location of all nodes
installed in the router.
Release Modification
Release 3.2 This command was introduced on the Cisco CRS-1.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 The location node-id keyword and argument were changed from required to
optional.
Task ID Operations
interface read
drivers read