ASIC Driver Commands on Cisco IOS XR Software
asic-scan egressq quick-scan
Syntax Description
Defaults
Command Modes
Command History
To run a quick ASIC scan on a specific file or on all bits of the chip, use the
filename | Name of the .xsvf file on which to run the quick ASIC scan |
|
|
allscan | Performs a quick ASIC scan on all bits of the chip, including |
| the preread for Metro. |
|
|
location | Identifies the location of the node hosting the egress queue on |
| which to run the ASIC scan. The |
| rack/slot/module notation. |
| Note Use the show platform command to see the location |
| of all nodes installed in the router. | |
|
| |
No default behavior or values | ||
EXEC |
|
|
|
| |
Release | Modification |
|
|
|
|
Release 3.5.0 | This command was introduced on the Cisco | |
|
|
|
Release 3.6.0 | Note was added in the Usage Guidelines section that this command can | |
| adversely affect the router operation. | |
|
|
|
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Note This command should be used only with Cisco support supervision. Incorrect usage of this command can accidentally remove the relevant card from service.
Task ID |
|
|
| Task ID | Operations | ||
|
|
|
|
| drivers | read, write | |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
Examples |
|
|
| The following example shows how to run a quick ASIC scan on all bits of the chip on the egress queue | |||
|
|
|
|
| that is located on the CPU node in slot 1: | ||
|
|
|
|
| RP/0/RP0/CPU0:router# | ||
|
|
| Cisco IOS XR Advanced System Command Reference | ||||
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
