ASIC Driver Commands on Cisco IOS XR Software
show controllers pse ipc
AR-101
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers pse ipc To display packet switching engine (PSE) device information for interprocess communication (IPC)
connections, or for a specific IPC controller, use the show controllers pse ipc command in EXEC mode.
show controllers pse ipc {client-connection {connID | all} | cpuctrlif} [egress | ingress]
[location node-id]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
client-connection connID Displays IPC information about the specified client
connection. Replace connID with the client connection ID.
Range is from 0 through 255.
client-connection all Displays IPC information about the all client connection.
cpuctrlif Displays IPC information about the specified PSE IPC CPU
controller instance.
egress (Optional) Displays IPC information for the egress PSE
device.
Note Follow the egress argument with the location node-id
argument to restrict the command to a specific node
containing the specified device instance.
ingress (Optional) Displays IPC information for the ingress PSE
device.
Note Follow the ingress argument with the location
node-id argument to restrict the command to a
specific node containing the specified device
instance.
location node-id (Optional) Identifies the location of the node whose PSE
device information you want to display. The node-id is
expressed in the rack/slot/module notation.
Note Use the show platform command to see the location
of all nodes installed in the router.
Note Include the egress or ingress argument before the
location node-id argum en t to res tri ct the command to
a specific device instance on the specified node.