ASIC Driver Commands on Cisco IOS XR Software
asic-scan pse egress help-block
To enable an ASIC scan that lists all block numbers of a specific egress packet switching engine (PSE) device, use the
Syntax Description |
| location | Identifies the location of the node that hosts the egress PSE |
|
|
| on which to enable the ASIC scan. The |
|
|
| in the rack/slot/module notation. |
|
|
| Note Use the show platform command to see the location |
|
|
| of all nodes installed in the router. |
|
|
|
|
|
|
|
|
Defaults |
| No default behavior or values |
|
Command Modes
Command History
EXEC
ReleaseModification
Release 3.6.0 | This command was introduced on the Cisco |
|
|
Usage Guidelines |
| To use this command, you must be in a user group associated with a task group that includes the proper | ||
|
| task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on | ||
|
| Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide. | ||
|
|
|
|
|
|
| Note | This command should be used only with Cisco support supervision. Incorrect usage of this | |
|
|
|
| command can accidentally remove the relevant card from service. |
|
|
|
|
|
|
|
|
|
|
Task ID |
| Task ID | Operations | |
|
|
|
| |
|
| drivers | read, write | |
|
|
|
|
|
|
|
|
|
|
Examples |
| The following example shows how to enable an ASIC scan that lists all block numbers on the egress PSE | ||
|
| that is located on the CPU node in slot 6: | ||
RP/0/RP0/CPU0:router#
|
| Cisco IOS XR Advanced System Command Reference |
|
|
|
|
|
| |||
|
|
|
|
| |
|
|
|
|
