ASIC Driver Commands on Cisco IOS XR Software
show controllers egressq port
AR-71
Cisco IOS XR Advanced System Command Reference
OL-14340-01
show controllers egressq port
To display egress queue information for a port, or for several ports, use the show controllers egressq
port command in EXEC mode.
show controllers egressq port {port1 [port2] | all | limits max] location node-id
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
port1 Identifies the port whose egress queue information you want to display.
Replace port1 with a port identifier. Range is from 1 through 1023.
port2 Identifies the last port whose egress queue information you want to display.
Replace port2 with a port identifier. Range is from 1 through 1023.
all Indicates that you want to display egress queue information for all ports on
the node in the specified location.
limits max Indicates that you want to display the maximum limits table.
location node-id Identifies the location of the egress queue whose group information you want
to display. The node-id is expressed in the rack/slot/module notation.
Release Modification
Release 3.2 This command was introduced on the Cisco CRS-1.
Release 3.3.0 This command was first supported on the Cisco XR 12000Series Router.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 No modification.
Task ID Operations
interface read
drivers read