Cisco Systems OL-14340-01 manual Clear controller pse statistics, AR-38

ASIC Driver Commands on Cisco IOS XR Software

clear controller pse statistics

clear controller pse statistics

To clear statistics maintained by the packet switching engine (PSE) on a specific node, use the clear controller pse statistics command in EXEC mode.

clear controller pse statistics [egress ingress] location node-id

Syntax Description

Defaults

Command Modes

Command History

egress	(Optional) Clears statistics on the egress PSE device only.
ingress	(Optional) Clears statistics on the ingress PSE device only.
location node-id	Identifies the location of the node whose PSE device statistics you want
	to clear. The node-idis expressed in the rack/slot/module notation.
	Note Use the show platform command to see the location of all nodes
	installed in the router.

If the egress or ingress keywords are not specified, the clear controller pse statistics command takes effect on both device instances.

EXEC

Release	Modification
Release 2.0	This command was introduced on the Cisco CRS-1.
Release 3.0	No modification.
Release 3.2	No modification.
Release 3.3.0	No modification.
Release 3.4.0	No modification.
Release 3.5.0	• The instance 0 and instance 1 keywords were replaced by the ingress and
	egress keywords.

•The clear controller pse statistics command was removed from the root-system task-ID.

•The clear controller pse statistics command was first supported under the interface task-ID.

Release 3.6.0 No modification.

Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

	Cisco IOS XR Advanced System Command Reference
AR-38	OL-14340-01